1 Enjoy the services of an expert plumber
The first advice we can give you to keep a plumbing system in perfect condition and save money may seem to you interested on our part but it is the most efficient and least expensive: Call an expert plumber at the first sign of failure in your system. You will avoid serious problems and significant disbursements.
2 Avoid negligence and prevent
The majority of the plumbing problems and water damage we encounter are due to neglect. It is possible to prevent many of your plumbing problems and significant costs through prevention.
Keep an eye on the lookout for faults in the components of your plumbing system. Inspect under countertop by opening cabinets under your kitchen sink and your bathroom sink looking for leakage or humidity. Stretch the ear to detect any noise from your toilet tank to make sure there is no flow as well as any seepage from its connection. Inspect the hose connections of your clothes washer, especially if they are a few years old. Being able to inspect the connections and underside of your dishwasher in search of a leak is an asset.
Inspect your water heater for leaks or rust and make sure you know where its life has been. When the water supply piping is visible, inspect it. Also inspect walls and ceilings under your appliances and plumbing components for dark circles or moisture when possible. Also make sure your drains are working properly.
This inspection will take only a few minutes but will ensure you keep your plumbing system in good condition and at a lower cost.
3 Prevent bursting of pipes by ice
If you have water pipes, both metal and pvc, which run along an outside wall and are visible to you, inspect them in very cold conditions.
If you leave your home for a long time in the winter or during a prolonged heating failure, take advantage of these recommendations:
Beware of over-heating your home
Leave your cabinet doors under your sink or sink open to maintain a sufficient temperature in these confined spaces
Let a stream of water from your taps flow to prevent freezing of stagnant water in your piping
Also make sure your piping and fittings are properly insulated in the unheated areas of your home and garage.
If you close your cabin for the winter, be sure to close the main water inlet and let the valves run out to completely empty your pipes. Do not forget to make sure that your water supply is well insulated upstream of your main water inlet valve.
4 Check your water heater
The useful life of a water heater is about 10 to 12 years. Check the installation date on your water heater if you do not know it. When your water heater has several years of service, pay close attention to the water heater. Check for leaks and rust. From 10 years of age, you must seriously think about replacing it. You avoid major damage that will cost you thousands of dollars, especially if you live in a dwelling or condo.
5 Your laundry or dishwasher hoses.
Check your clothes washer and dishwasher hoses regularly. The rubberized hoses in your clothes washer will dry out with age and show signs of weakness by external cracks. You must change these casings at the first sign of weakness or every 10 years. The same goes for your dishwasher hoses, even if they are made of flexible metal. Always choose quality materials, saving a few dollars at the risk of causing damage for several thousand dollars is not a good saving.
6 Your external faucets
Do not forget to empty your outdoor water supply pipes before winter, either for your pool or for your garden hose, unless you have frost-proof taps. If you have an unheated garage that is supplied with water, you should also consider protecting yourself from frost.
7 Act quickly in an emergency
Even if you take all the necessary care to avoid a leak or a water damage, a break can happen. Immediately close the supply valve of the defective plumbing element. This valve is usually located close to the item to be repaired, for example, under your sink or sink, behind your clothes washer, a hatch behind your bathtub supply, or above your water heater.
If you can not stop the leak, immediately turn off the main power to your home. It is usually found in the basement near the wall facing the street and the municipal feeding system.
8 Thawing frozen pipes
When you run out of water or you have very little water pressure in winter on a particular component of your plumbing system and its pipe passes near an outside wall exposed to the cold, Frozen pipe. It is necessary to act quickly before bursting.
You need to identify where the gel is formed, usually in a cupboard or wardrobe against an exterior wall when the piping is visible. These are cooler places and may be poorly insulated.
To facilitate recovery of normal flow, open the tap on the section affected by freezing. The most effective and safest way and the use of a hair dryer. You should distribute heat evenly upward to frozen part of the piping and be patient. Other heating elements such as a heating fan, or an electric lamp that gives off a lot of heat can be used. But be careful not to ignite flammable components surrounding your piping. The propane torch is to be avoided. The danger of fire is too great and you can damage your piping.
When the pipeline is not apparent, you must use the same means to warm up the environment of your hidden piping. But you will have to redouble your patience.
If you are unable to restore water flow, call a plumber promptly to avoid a burst pipe and subsequent water damage.
To prevent freezing of pipes in the most hazardous locations, you can coat your pipes with insulating foam inserts that are offered in low cost hardware. A heater wire may be needed in less accessible locations.
9 Prevent blocked pipes with a cleaner
Make your own sewer pipe cleaner with home-made products at your fingertips. Pour equal parts of baking soda and vinegar into your bathtub or sink drain once a month. Once the products have been poured into the drain, put the stopper and leave for about 20 minutes. Rinse your drain in boiling water. You thus help to facilitate the elimination of the hair and soap that are accumulated in your drain.
You can also use two products that you usually find in your kitchen to prevent blocked pipes. Use half a cup of baking soda and half a cup of salt as you mix and drain into your drain. Add boiling water.
Both of these methods are as effective and less harmful as the products on the market, while being more natural and less toxic.
Other products that are said to be ecologically based enzymes are emerging on the market and can help keep your ducts clean. These enzymes digest the dirt accumulated in your ducts but do not open a pipe that is already clogged. In addition, there is no consensus among experts on the true impact of these products on ecology.
10 When to repair yourself?
You have a bri you want to fix yourself? Make sure you have everything you need on hand and have recourse available if you need additional parts. For example, you must repair the flush toilet. One part of the mechanism is defective. You think you can easily replace this part. However, it is possible that the entire mechanism is no longer available with identical components. Plumbing components are evolving. You can purchase the in-store repair kit that will not be compatible with your existing toilet.
Also, a piece that is nearing its end of life can also mean that other parts are ready to let go. You disassemble a piece and the next one breaks it too. You are Saturday night. Hardware stores are closed until Monday. You can not turn on the water and you have to do without your toilet for the entire weekend.
Make sure you have everything you need to complete the job.
Or do business with a professional plumber like augustaplumbers.net. He keeps all the spare parts available in his truck.
These are tips given to you as a preventive or troubleshooting first instance for minor problems. It is better to use the services of a professional plumber who will cost you a few dollars only to avoid damaging your plumbing system and take the risk of aggravating the situation and ultimately having to pay a lot More expensive later on for larger problems.